瑞宝Focus系列锁模机构采用5点肘杆系统,经过有限元分析,变形比普通机减小三分之一,更强的刚性可适应精密产品的成型,也能为模具提高寿命。
Rainbow Focus Series clamping unit adopts 5 points toggle system, it decreases 33% distortion comparing normal system, the better rigidity can adapt precise products molding and highly improve mold’s life time.
容积定量润滑分配系统
Volume Quantitative Lubrication Distribution System
可确保每个润滑点均得到充分润滑,且油量分配平均,润滑效率高。大大增加了摩擦部件的寿命。
It can make sure every lubrication point be fully lubricated, average oil distribution and higher lubrication efficiency. It can greatly improve the working life time of the lubrication parts.
特殊顶出杆结构设计
Special Ejector Rod Structure Design
使得安装反拉顶出杆变得非常方便,大大扩展了机器的适应性。
This design makes it very convenient to install counter pull ejector rod, which extremely expands the adaptability of the machine.
内藏式安全杆
Built-in Mechanical Safety Bar
机械保险杆内置使得整机更加美观,且安全性更高。
Built-in mechanical safety bar, makes the outfit more harmonious and safer;
加大的拉杆间距离及超大的开模行程可实现多模腔模具的轻松安装,且对日益增大的精密模具尺寸具有更好的适应性。
Enlarged space between tie-bars and bigger opening stroke can achieve the easy installation of multi-cavities mould, and it has better adaptability for the increasing precise mould dimension.
液压马达配合齿轮调模系统,是调机系统更加合理和完美;
Hydraulic motor with gear mold system, the transfer system is more reasonable and perfect;
高钢性抗磨损镀硬铭导柱,具有高精度、高拉力、高强度、长寿命 ;
High rigidity anti-wear hard plating Ming guide column, with high precision, high tensile strength, high strength, long life
瑞宝Focus系列之注射装置采用双缸注射技术,射出响应快、精度高、动作惯量小、机械背压小,适合成型精密及薄壁制品。
The injection unit of Rainbow Focus Series adopts Double Cylinder Injection Technology, the fast injection response, high accuracy, small motion inertia, small mechanical back pressure, make it suitable for producing precise and thin-wall products.
双线性导轨
Double Linear Guide Rail
采用双线性导轨,摩擦力小,使动作更快、更精确、更稳定。
Adopting double linear guide rail for injection unit, it has lower friction, faster speed, better precision and stability.
优秀的密封件供应商
Outstanding Seal Element Suppliers
油封采用世界名厂制作,使用寿命更长。
World famous brands oil sealing element, longer working lifetime.
双油缸注射
Double Injection Cylinder
双缸射出机构,射出平稳、精确、快速;标准高品质SKD61过胶组、38CrMoAl螺杆料筒,塑化效果好,持久耐用。
Double injection cylinder, ensures the precision, stable and high speed injection. Standard high quality SKD61 screw tip, check ring and trust ring, 38CrMoAl screw and barrel, make the machine has a wonderful plasticization ability and longer working life.
双射移油缸
Double Carriage Cylinder
双射移结构有效避免喷嘴偏摆现象、确保与模具的贴合面不漏胶。
Double carriage cylinder structure, avoids nozzle bias error, ensures the touching surface between nozzle and mould has no leakage.
液压电气单元
Hydraulic and electric Unit
著名品牌液压元件
World Renowned Brands Hydraulic Components
所有液压元件均采用世界知名厂商制造的产品,保证机器运行的稳定性与耐用性。
Adopt world-famous brands of hydraulic parts, ensure machine's precision, durability and stability.
比例背压控制
Proportional Back Pressure Control
熔胶背压采用比例压力控制,工艺调整范围更广,产品更稳定。
Melt back pressure adopts proportional back pressure control, makes the process adjustment range wider and producing status more stable.
节能动力系统
Energy-Saving Power System
采用伺服电机加内啮合齿轮汞动力系统,实现能量需多少,给多少的动力输出模式,极大地节约了能源,较之传统的动力输出模式减少能耗约20%-80%。
Adoption of servo motor and internal gear pump power system, realizes the power output mode of ‘Energy output only depend on the require demand’. It avoids energy waste and the energy-saving ability can reach to 20%-80% comparing with the traditional power output mode for injection molding machine.
提高成型稳定性
mprove the molding stability
优异的高响应性
Excellent high response